Ricoh M065 Service Manual page 458

System Service Mode
[Shading Correct Setting] FA
Adjusts the area correction value for each LD power.
The main scan is divided into 16 areas. However, the image areas are limited
from area 1 to area 14.
2152
For BK and Magenta, area 1 is at the rear side of the machine (left side of the
image) and area 14 is at the front side of the machine (right side of the image).
For Cyan and Yellow, area 1 is at the front side of the machine (right side of the
image) and area 14 is at the rear side of the machine (left side of the image).
001 Bk: LD1 Area 0
002 Bk: LD1 Area 1
003 Bk: LD1 Area 2
004 Bk: LD1 Area 3
005 Bk: LD1 Area 4
006 Bk: LD1 Area 5
007 Bk: LD1 Area 6
008 Bk: LD1 Area 7
009 Bk: LD1 Area 8
010 Bk: LD1 Area 9
011 Bk: LD1 Area 10
012 Bk: LD1 Area 11
013 Bk: LD1 Area 12
014 Bk: LD1 Area 13
015 Bk: LD1 Area 14
016 Bk: LD1 Area 15
017 Bk: LD2 Area 0
018 Bk: LD2 Area 1
M065/M066
*ENG
[50 to 150 / 100 / 0.1 %/step]
*ENG [50 to 150 / 98.4 / 0.1 %/step]
*ENG [50 to 150 / 98.8 / 0.1 %/step]
*ENG [50 to 150 / 97.9 / 0.1 %/step]
*ENG
[50 to 150 / 98 / 0.1 %/step]
*ENG [50 to 150 / 99 / 0.1 %/step]
*ENG [50 to 150 / 99.9 / 0.1 %/step]
*ENG [50 to 150 / 100.5 / 0.1 %/step]
*ENG
[50 to 150 / 100.4 / 0.1 %/step]
*ENG
[50 to 150 / 100.9 / 0.1 %/step]
*ENG [50 to 150 / 101.9 / 0.1 %/step]
*ENG [50 to 150 / 102.7 / 0.1 %/step]
*ENG
[50 to 150 / 103.5 / 0.1 %/step]
*ENG
[50 to 150 / 104.5 / 0.1 %/step]
*ENG [50 to 150 / 105.5 / 0.1 %/step]
*ENG [50 to 150 / 98.4 / 0.1 %/step]
*ENG [50 to 150 / 100 / 0.1 %/step]
*ENG
[50 to 150 / 98.4 / 0.1 %/step]
8-48 SM Appendix