Ricoh M065 Service Manual page 338

SC Tables
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Fusing/Paper exit motor error
The BCU receives the lock signal 2.0 seconds after turning on the
fusing/paper exit motor.
540 D
1.
2.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Heating roller thermopile error
The temperature measured by the heating roller thermopile does not
reach 0°C for 6 seconds.
541 A
1.
2.
M065/M066
Motor overload
Defective fusing/paper exit motor
Defective or disconnected connection for the fusing/paper exit
motor
Replace the fusing/paper exit motor.
Check or replace connector and harness for the fusing/paper exit
motor.
Loose connection of the heating roller thermopile
Defective heating roller thermopile
Defective thermopile
Check if the heating roller thermopile is firmly connected.
Replace the heating roller thermopile.
3-28 SM Appendix