Ricoh M065 Service Manual page 536

System Service Mode
[Thick 3: T-Edge Correct] DFU
Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2656
edge in each mode. SP2648 and SP2649 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
004 Separation DC: 2nd
[Thick 3: Switch Timing: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2657
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
004 Separation DC: 2nd
[Thick 3: Env. Correct Table] DFU
2660
Thick 3 Paper: MM Environment Coefficient Adjustment
015 Separation DC: 1st
016 Separation DC: 2nd
[Thick 3: Edge-Env. Correct] DFU
019 Separation DC: 1st
020 Separation DC: 2nd
M065/M066
*ENG
*ENG
[0 to 995 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[1 to 100 / 30 / 1 /step]
*ENG
*ENG
[1 to 100 / 30 / 1 /step]
*ENG
8-126 SM Appendix