Ricoh M065 Service Manual page 472

System Service Mode
[MUSIC Condition] DFU
2193
Line Position Adjustment: Condition Setting
Auto Execution
001
Enables/disables the automatic line position adjustment.
Page: Job End: BW+FC
002
Adjusts the threshold of the line position adjustment for BW and color printing
mode after job end.
Page: Job End: FC
003
Adjusts the threshold of the line position adjustment for color printing mode
after job end.
Page: Interrupt: BW+FC
004
Adjusts the threshold of the line position adjustment for BW and color printing
mode during job.
Page: Interrupt: FC
005
Adjusts the threshold of the line position adjustment for color printing mode
during jobs.
Page: Standby: BW
Adjusts the threshold of the line position adjustment for BW printing mode in
006
stand-by mode. The line position adjustment is done when the number of
outputs in BW printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Page: Standby: FC
Adjusts the threshold of the line position adjustment for BW printing mode in
007
stand-by mode. The line position adjustment is done when the number of
outputs in color printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Temp Change
008
Adjust the temperature change threshold for the line position adjustment
(Mode b: adjustment once). The timing for line position adjustment depends on
M065/M066
*ENG [0 or 1 / 1 / 1 ] 0: OFF, 1: ON
*ENG [0 to 999 / 500 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG
[0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG
[0 to 999 / 100 / 1 page/step]
*ENG [0 to 999 / 100 / 1 page/step]
*ENG [0 to 100 / 5 / 1 deg/step]
8-62 SM Appendix