Ricoh M065 Service Manual page 365

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Log Data Error 5
Installed NVRAM or HDD which is used in another machine
-005
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD.
Log Data Error 99
-099 Other than the above causes
Ask your supervisor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD Data Overwrite Security SD card error
The 'all delete' function cannot be executed but the
DataOverwriteSecurity Unit is installed and activated.
CTL
877
Defective SD card
D
SD card not installed
1. Replace the NVRAM and then install the new SD card.
2. Check and reinstall the SD card.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
TPM system authentication error
The system firmware is not authenticated by TPM (security chip).
CTL
878
Incorrect updating for the system firmware
D
Defective flash ROM on the controller board
Replace the controller board.
SM Appendix 3-55
SC Tables
M065/M066