Ricoh M065 Service Manual page 444

Gestetner, lanier, savin

Table of Contents

System Service Mode

013 Alone Time

014 Coefficient of Correction

[Charge AC Adj: Result]

[Color Regist Adust]

These values are the parameters for the automatic line position adjustment

and are adjusted at the factory. However, you must input a value for

SP2101-001 after replacing the laser unit. For details, see "Laser Unit" in the

"Replacement and Adjustment" section. The value should be provided with the

new laser unit.

001 Bk: Main Scan: Dot

002 C Main Scan: Dot

003 M Main Scan: Dot

004 Y Main Scan: Dot

005 Bk: Sub Scan: Line

006 C: Sub Scan: Line

007 M: Sub Scan: Line

008 Y: Sub Scan: Line

[0 to 1440 / 360 / 10 min/step]

[0 to 2 / 1 / 0.01 kV/mA/step]

[0 to 9 / 0 / 1 /step]

[–511 to 511 / 0 / 1 dot/step]

[–800 to 800 / 0 / 1 line/step]

Chapters

Table of Contents