Ricoh M065 Service Manual page 678

Gestetner, lanier, savin
Table of Contents

Advertisement

System Service Mode
013 POP3/IMAP4 Auth.
014 POP Serv Port No.
015 IMAP4 Srvr Port
016 SMTP Rx Port No.
017 Mail Rx Interval
019 Mail Keep Setting
020 Partial Mail Receive Timeout
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is
not received during this prescribed time.
021 MDN Response RFC2298 Compliance
Determines whether RFC2298 compliance is switched on for MDN reply mail.
0: No
1: Yes
M065/M066
If POP before SMTP is enabled, then
you can use this SP to enable or
disable encryption mode for POP
authentication
[0 to 2 / 0 / 1]
0: Auto
1: Off
2: On
Input the POP server port number.
Input the IMAP4 server port number.
Input the SMTP port for the mail
reception.
Specifies the interval for the mail
reception.
Selects the mail saving setting.
[0 to 2 / 0 / 1]
0: Not saved in the mail server
1: All saved in the mail server
2: Only error mails saved in the mail
server
[1 to 168 / 72 / – ]
[0 to 1 / 1 / – ]
8-268
SM Appendix

Advertisement

Table of Contents
loading

Table of Contents