JRC JLR-7500 Instruction Manual page 94

6. When "UNICAST" is selected, press
and "PORT No.".
7. Press "FORMAT".
8. Press
9. Press "OUT TYPE".
10. Press
The following is an overview of the output data submenu.
(1) ALL: Output all routes between 1 and 101.
(2) ROUTE LIST: Select a range on the route list to be output.
(3) ROUTE No.: Specify the route number to be sent with the numeric keypad.
(4) FROM TO: Enter the start and end points of the range to be sent with the numeric
Please refer to "4.8.3 Selecting a Range within a List" for details regarding range selection.
11. Press "START".
12. The following will be displayed. Select "YES", and press
4-50
to select "SHARE ROUTE", and press
to select the output data, and press
keypad.
and to select the Destination IP "TO IP"
.
.
.