JRC JLR-7500 Instruction Manual page 171

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

(3) When DGPS sensor attached to poles with cut male screws, round off the corners.
(4)When performing attachment, always hold and turn the sensor base. Holding and turning the
radome may result in a large amount of force applied at the junction of the base and the
radome, resulting in damage to the sensor.
Radome
Joint
Do not apply force to the joint.
Base
round off the corners
1inch-14UNS-2A
Hold and turn the base.
25mm
6-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents