Table of Contents
Advertisement
Distance from ship position to
cursor specified waypoint
Up / Down Scroll
Cursor
Position
Bearing from previous
waypoint
3.
Move the cursor to the waypoint whose waypoint information you wish to display, and press
.
Refer to "4.8.1 Moving the Cursor within a List" for details regarding cursor movement.
WPT Info
The following items can be set.
(1) WIDTH PORT:
(2) WIDTH STBD:
(3) ARRIVAL RAD: The arrival circle radius can be set.
(4) SPEED:
(5) SAIL GC/RL:
GC:
RL:
(6) STATUS:
(For newly created routes and routes with one waypoint, waypoints can not be set
as unused or deleted)
USED:
SKIP:
DELETE:
(7) DETAILS:
(7-1)
TURN RATE: The rate of turn when passing a waypoint can be set.
(7-2)
TURN RADIUS: The turn radius when passing a waypoint can be set.
(7-3)
TIME ZONE: The time difference with the waypoint can be set.
LEG Information Screen
The port route width can be set.
The starboard route width can be set.
The planned speed of the LEG can be set.
The LEG distance calculation method can be set.
Distance is calculated using the great circle method.
Even if GC is set, RL is shown on plot screen.
Distance is calculated using the rhumb line method.
You can set whether the waypoint will be used or not.
The waypoint is used.
The waypoint remains on the route, but is skipped.
All waypoints cannot be skipped.
Delete from the route. The waypoint will remain on the waypoint list.
The waypoint on the active route cannot be deleted.
ROT, turn radius, and time zone settings can be performed.
Required time from ship position to
cursor specified waypoint
No display : Use
SKIP: Skip Waypoint
LEG distance
WPT Info (Details)
LEG distance
calculation methods:
R: Rhumb line
G: Great circle
4-41
Advertisement
Table of Contents
