Optional Peripheral Connection; Sub Display Connection - JRC JLR-7500 Instruction Manual

6.4 Optional Peripheral Connection

6.4.1

Sub Display Connection

Connect the sub display sensor connection terminal to the main display external equipment
connection terminal (serial).
Use a junction box (CQD-10).
Any main display external equipment connection terminal can be used. The following
specifications apply to the terminal.
Data format: IEC
Bit rate: 4800 bps
Sentence Sub Display: "On"
To display satellite information on the sub display, change the bit rate to "9600 bps", and add
"GSV" and "CD, GP, 3" to the sentence setting.
Set the display type to "Sub" to use the unit as a sub-display.
Sub Display
①
②
③
④
⑤
⑥
Sub display sensor
connection terminal
6-18
Connect to receiver connection terminal
Junction Box/CQD-10
DGPS Cable/CFQ-9002
Caution: carries voltage
Wrap this section with vinyl tape to protect.
○
○
○
:
○
CQD-10
terminal board
Connect to external equipment connection terminal
Main Display
Data Cable/CFQ-5374
TXDB
TXDA
Main display
external equipment
connection terminal