JRC JLR-7500 Instruction Manual page 151

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

(2) When "IEC" is Selected
Select the bit rate, output sentence, and interval.
The selected sentence is displayed.
If no sentence has been selected, no
sentence is displayed.
If no sentence is displayed, the output sentence has not been selected.
4.
Press "SENTENCE".
5.
Move the cursor to the sentence you wish to output, and press
6.
The output interval is displayed. Select the interval and press
(3) Selecting "ROUTE" and sending data
Saved routes and waypoints are output as RTE and WPL sentences.
Select the version, bit rate, and output type.
3.
Press "DATA IN/OUT".
4.
Press
5.
Press "BITRATE", and select the bit rate.
6.
Press "FORMAT", and select the format.
"NMEA Ver1.5", "NMEA Ver2.1", and "NMEA Ver2.3" can be chosen as data formats.
to select "OUT", and then press
Sentence and Interval Setting Screen
.
.
.
4-107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents