Print; Ship Information Is Printed When It Is Necessary; Setting The Output Interval - JRC JLR-7500 Instruction Manual

4.19 Print

･ When # key is pressed to print, ship information is printed on DPU-414 Printer.
･ To print with the # key is DPU-414 printer exclusive use. Please operate the printer when
printing on NKG-84 Printer.
· The # key can be used from any screen other than the menu screen, waypoint information
screen, or Navigation Assistance 4 screen.
･ To print, please switch DATA IN/OUT1 setting to "PRINTER" .

4.19.1 Ship information is printed when it is necessary

Procedure
1. Press .
2. The following will be displayed. Press
Ship information is printed.

4.19.2 Setting the output interval

･ The output interval is set, and it is possible to print regularly.
･ You can choose "1 min", "3 min", "5 min", "10 min", "20 min", "30 min", "60 min", "OFF" and
"ONCE" as interval time.
･ If "OFF" is selected, data is not output. If "ONCE" is selected, data is output one time.
Procedure
1. Press and hold
2. Press "INTERVAL".
3. Press
4-98
for 3 seconds.
to select interval time and press
to select "YES", and press
.
.