Sharing Active Routes - JRC JLR-7500 Instruction Manual

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

4.5.6.2

Sharing Active Routes

If a route is switched on this unit or on ECDIS when sharing the active route, the connecting
equipment's route will also switch.
Sharing must be enabled to share active routes.
The following is an overview of the active route sharing configuration submenu.
(1) SHARE1:
If the active route is switched on the unit, the route will automatically be sent
out to connected equipment.
When a shared route is received, the route is automatically switched.
(2) SHARE2:
If the active route is switched on the unit, a request is made to the user of the
unit before the route is sent. Transmission of the route to the connected
equipment is dependant on the permission of the user.
If the user has not authorized sending, the active route will only be executed on
the local unit.
When a shared route is received, the route is automatically switched.
(3) SHARE3:
If the active route is switched on the unit, the route will automatically be sent
out to connected equipment.
When a shared route is received, the user is asked whether or not they want to
switch routes.
If the user does not authorize route switching, the route will not be switched.
(4) SHARE4:
If the active route is switched on the unit, a request is made to the user of the
unit before the route is sent. Transmission of the route to the connected
equipment is dependant on the permission of the user.
If the user has not authorized sending, the active route will only be executed on
the local unit.
When a shared route is received, the user is asked whether or not they want to
switch routes.
If the user does not authorize route switching, the route will not be switched.
If the active route is configured for sharing, an icon will be displayed on the status bar at the
bottom of the screen.
If the icon is not displayed, refer to "4.20.7.7 Setting LAN Settings" and configure sharing.
SHARE1 Icon:
Procedure
(1) SHARE 1 Active Route Sharing
Route Start / Output
1.
Start the route as directed in "4.6 Performing Navigation".
LAN route output starts automatically.
Route Reception
Route switching occurs automatically.
(2) SHARE 2 Active Route Sharing
Route Start / Output
1.
Start the route as directed in "4.6 Performing Navigation".
2.
When the route is started, the following will be displayed.
Select "YES" to output the active route externally.
Select "NO" to not output the active route externally. If no external output is performed,
the active route is performed only on the local unit.
SHARE2 Icon:
SHARE3 Icon:
SHARE4 Icon:
4-51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents