Centering The Cursor Position; Changing Cursor Size; Moving The Screen - JRC JLR-7500 Instruction Manual

4.3.1.3

Centering the Cursor Position

· The position of the cursor can be displayed at the center of the screen.
Procedure
1. Display the cursor.
2. Move the cursor to the point on the screen which you want to be centered.
3. Press .
The position the cursor was at will be moved to the center of the screen.
4.3.1.4

Changing Cursor Size

· The cursor size can be set to one of 3 sizes.
Procedure
1. Press , then
2. Press "CURSOR".
3. Use to select the size, and then press
4.3.2

Moving the Screen

· The screen can be moved up, down, left, right, and diagonally
Procedure
1. If the cursor is displayed, press
2. Press
Press
diagonally. Holding the buttons down will cause the screen to accelerate while continuing its
movement.
, then
to move the screen up, down, left, or right.
, ,
to display the "PLOT SET2" Screen.
.
to hide the cursor.
or simultaneously to move the screen
4-11