Input Assistance Settings; Selecting The Display Screen - JRC JLR-7500 Instruction Manual

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

4.14.5 Input Assistance Settings

· Input assistance display can be turned on or off.
ON: Input assistance display enabled
OFF: Input assistance display disabled
Procedure
1.
Press
,
2.
Press

4.14.6 Selecting the Display Screen

· You can select which screen is displayed.
· Set screens which you wish to display to "ON", and screens which you do not wish to display to
"OFF".
· You can set the navigation information , PLOT1, PLOT2, PLOT3, CDI, or GPS information
screens to be displayed when the unit is started. Set the screen you wish to display on startup
to "START".
· Only one screen can be set to "START". To change the "START" screen, change the value of
the currently set "START" screen to something other than "START" before setting the new
"START" screen.
Procedure
1.
Press
,
2.
Enter the number of the screen you wish to set with the numeric keypad.
4.
Press
4-84
, and then
to select "ON" or "OFF", and press
, and then
to select "START", "OFF", or "ON", and press
to select "INPUT ASSIST".
.
to select "DISPLAY SELECT".
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents