Setting Tidal Current Meter Input - JRC JLR-7500 Instruction Manual

(5) Remote maintenance data output setting
3. Use to select "REMOTE MAINTE", and press
4. Press
5. Press "CONNECT".
6. Select the connection destination with
"MULTICAST", "UNICAST", or "BROADCAST" can be set as connection destinations.
Normally, "MULTICAST" should be selected.
When "UNICAST" is selected, destination IP "2. To IP" and "3. Port No." can be set.
7. Press "INTERVAL".
8. Press

4.20.7.8 Setting Tidal Current Meter Input

· You can perform tidal current meter input settings.
· Data need to be entered starting with DATA IN4.
Procedure
1. Refer to "4.20 Equipment Configuration" and display the equipment configuration menu.
2. Press , and then
3. Select "EXT EQUIP" with
4. The tidal current meter input screen will be displayed.
You can select the layer and data number you wish to display.
4-116
to select "ON", and then press
to select the output period, and press
to select "DATA IN/OUT4".
, and press
.
.
, and press .
.
.