Waypoint Symbol Display; Displaying Waypoint Information - JRC JLR-7500 Instruction Manual

4.3.6

Waypoint Symbol Display

· The symbols and numbers of waypoints registered in the waypoint list are displayed on the plot
screen.
· Up to 1000 waypoints can be displayed on one screen.
· To turn off waypoint symbol display, set "WPT" to "OFF" as described in "4.3.12 Hiding Plot
Screen Symbols".
4.3.6.1

Displaying Waypoint Information

Waypoint information can be displayed by moving the cursor to the waypoint and leaving it in
place for 1 second or longer.
If the cursor is moved off of the waypoint, the waypoint information will be hidden.
The following waypoint information is shown.
· For waypoints on route
Symbol shape, number, comments, latitude, longitude, arrival circle radius, port route width,
starboard route width, bearing from own ship, distance, estimated time of arrival.
· For waypoints off route Symbol shape, number, comments, latitude, longitude
Waypoint Number
Comment
Waypoint
Position
Port Route Width
Starboard Route Width
Arrival Circle Radius
Planned Speed
Bearing From Own Ship
Distance From Own Ship
Estimated Time of
Arrival
Waypoint No.
Comment
Waypoint
Position
Procedure
1. Press , and display the cursor.
2. Press
Leave the cursor in place for 1 second or longer, and the waypoint information will be
displayed.
to move the cursor to the waypoint symbol.
Route Waypoint Information
Symbol
Route
Waypoint
Cursor
Symbol
Waypoint
information
of waypoints
not on route
4-13