Registering Waypoints - JRC JLR-7500 Instruction Manual

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

4.4.2

Registering Waypoints

The following 5 positions can be registered in the waypoint list.
(1) Own ship position
(2) Specified latitude and longitude
(3) Cursor position
(4) Position defined by a bearing and distance from a specified point
(5) A position registered in the event/mark list
Up to 10000 points can be registered.
To register, first display the waypoint registration screen.
Procedure
1.
Press
,
2.
Move the cursor to the number you wish to register, and press
To move the cursor to the desired number, you can use the following methods:
(1) Move with the up and down keys
(2) Enter the desired number with the numeric keypad
(3) Jump to a number without registered contents
Please refer to "4.8.2 Moving the Cursor to an Unregistered Number" for details.
3.
The waypoint registration screen will be displayed.
4-30
, and then
, and display the waypoint list.
Select waypoint position
.
Enter latitude and longitude with
numeric keypad and register
Register current own ship position
Register cursor position
Register bearing and distance
Register from event/mark list

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents