JRC JLR-7500 Instruction Manual page 119

(1) ARRIVAL/ANCHOR
3. Press "ARRIVAL/ANCHOR".
4. Press
An alarm will sound when own ship enters or exits the arrival circle set for the course. If no
arrival circle is set, then an alarm will sound when own ship enters or exits the default course
value arrival circle radius.
Alarms cannot be set for both "ARRIVAL" and "ANCHOR".
Arrival
Waypoint Arrival Alarm
(2) XTD/BOUNDARY
5. Press "XTD/BOUNDARY".
6. Press
If the ship leaves or enters the set route, the alarm will sound. If no route is set, then an
alarm will sound when the ship enters or exits the default route width.
Alarms cannot be set for both "XTD" and "BOUNDARY".
XTD
Route Width
to select "ARV", "ANC", or "OFF", and press
Waypoint Arrival Circle
to select "XTD", "BOUNDARY", or "OFF", and press
XTD Alarm
Anchor
Anchor Alarm
Boundary
Route Width
.
Waypoint Arrival Circle
.
Boundary Alarm
4-75