Setting The Time Display; Setting The Geodetic System; Setting Distance And Speed Units; Setting Height And Depth Units - JRC JLR-7500 Instruction Manual

4.15.3 Setting the Time Display

· You can select 24 hour or 12 hour time display.
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1. Press ,
2. Select the display format with

4.15.4 Setting the Geodetic System

· You can select the geodetic system to use.
· You can choose between 46 types of geodetic systems. Please refer to "Appendix 1 Geodetic
Systems" for details.
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1. Press ,
2. Select the geodetic system with

4.15.5 Setting Distance and Speed Units

You can select "NM, kn", "km, km/h", or "mi, mi/h" for distance and speed units.
Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1. Press ,
2. Select the units with

4.15.6 Setting Height and Depth Units

· You can select m, ft, or fm for height and depth units.
· If you select fm, enter the conversion value from "m". The default value is 1 fm = 1.8288 m.
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1. Press ,
2. Select the units with
If you select fm, you must enter the conversion value from "m".
3. Press
press .
4-86
, and then
, and then
, and then
, and press
, and then
, and press
to select "SET", enter the conversion value with the numeric keypad, and
to select "TIME DISP".
, and press .
to select "DATUM".
, and press
to select "UNIT - DIST/SPEED".
.
to select "HEIGHT/DEPTH".
.
.