To keep the default value, or restore the unit to the default value, select "DEFAULT".
4.15.7 Setting Temperature Units
· You can set the temperature unit to ºC or ºF.
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1.
Press
,
2.
Select the units with
4.15.8 Setting Magnetic Correction
· You can set the method of magnetic correction to be automatic or manual, or turn magnetic
correction off.
· If you select automatic, correction is automatically calculated for the correction value from the
GPS position.
· If you select manual, correction is performed using a manually entered value.
· If you turn magnetic correction off, no correction is performed.
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1.
Press
,
2.
Select the correction method with
When Manual is selected
3.
Select E/W using
.
, and then
to select "TEMPERATURE".
, and press
, and then
to select "MAG CORR".
, enter the correction value with the numeric keypad, and press
.
, and press
.
Enter calculated
value and press
4-87