JRC JLR-7500 Instruction Manual page 81

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

(3) When "WPT No." is Selected
Use the numeric keypad to select the waypoint number to be copied, and press
(4) When "FROM TO" is Selected
Multiple waypoint numbers can be copied. Use the numeric keypad to enter the start and
end point waypoint numbers, and press
4.
The cursor will move to the "COPY DEST", so press
5.
Press
The following is an overview of the copy destination submenu.
(1) WPT LIST:
(2) WPT NO.:
When multiple numbers are selected as the copy source, the information will be pasted
sequentially starting from the selected copy destination number.
(1) When "WPT LIST" is Selected
Numbers 1 - 10000 of the waypoint list will be displayed. Move the cursor and press
Please refer to "4.8.2 Moving the Cursor to an Unregistered Number" for more details.
(2) When "WPT No." is Selected
Use the numeric keypad to select the waypoint number to be copied to, and press
to select the copy destination, and then press
Select the waypoint number from the waypoint list to copy information
to.
Use the numeric keypad to enter the waypoint number to copy
information to.
.
.
Copy Origin Start
Copy Origin End
Copy Quantity
.
.
.
.
4-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents