Event And Mark Symbol Display; Entering Events; Entering Marks - JRC JLR-7500 Instruction Manual

4.3.9

Event and Mark Symbol Display

· Events and marks registered in the event/mark list can be displayed on the plot screen.
Event: When the event key is pressed, a symbol is displayed at the own ship's position, and is
registered in the event/mark list.
Mark: When the mark key is pressed, a symbol is displayed at the cursor position, and is
registered in the event/mark list.
· Up to a total of 1000 symbols (including MOB and line change points) can be registered and
displayed.
· To disable event and mark display, set "EVENT" and "MARK" to "OFF" as described in "4.3.12
Hiding Plot Screen Symbols".

4.3.9.1 Entering Events

Event symbols are displayed at the own ship's position on the plot screen, and are registered to
the event/mark list.
They are registered to the event/mark list in ascending numerical order.
Procedure
1. Press .
Memo
· As long as the menu screen, waypoint information screen, or navigation assistance 4
screen are not displayed, the ship's position can be registered by pressing the
button without exiting the plot screen.
4.3.9.2

Entering Marks

Mark symbols are displayed at the cursor position on the plot screen, and are registered to the
event/mark list.
They are registered to the event/mark list in ascending numerical order.
Procedure
1. Press , and display the cursor.
2. Move the cursor to the position you wish to register, and press
Memo
· If is pressed without displaying the cursor on the plot screen, an event symbol
will be displayed at the own ship's position, and registration will occur.
4-20
.