Registering The Cursor Position; Registering A Bearing And Distance From A Specified Position - JRC JLR-7500 Instruction Manual

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

4.4.2.3

Registering the Cursor Position

Any cursor position on the plot screen can be registered to the waypoint list.
Procedure
1.
Please refer to "4.4.2 Registering Waypoints" and display the waypoint registration screen.
2.
Press
"POSITION".
3.
Press
, move the cursor to "CURSOR", and press
4.
The plot screen will be displayed.
Press
register.
When the cursor is moved, the cursor position is displayed at the top right of the screen.
5.
The cursor position is shown in "5. WPT LAT", "6. WPT LON".
6.
Press
"ENTRY".
4.4.2.4

Registering a Bearing and Distance from a Specified Position

A position can be specified as a start point, and then another position defined by its bearing and
distance from said start point can be registered to the waypoint list.
Any of the following 6 can be used as a start point.
(1) Specified Longitude Latitude:
(2) Own Ship Position:
(3) Cursor Position on Plot Screen:
(4) Position Registered in Waypoint List:
(5) Position Registered in Event/Mark List:
(6) When Continually Setting Waypoints, the Last Registered Position:
Procedure
1.
Please refer to "4.4.2 Registering Waypoints" and display the waypoint registration screen.
2.
Press
"POSITION".
3.
Press
, move the cursor to "BRG/DIST", and press
4.
The start position setting screen will be displayed.
Press
"START POINT", press
(1) When "LAT/LON" is Selected
Press
"START LAT", enter the latitude with the numeric keypad, and press
N/S can be selected via
Press
"START LON", enter the longitude with the numeric keypad, and press
E/W can be selected via
When "START LAT" is entered, the cursor moves automatically to the latitude numerical
entry position. If "START LON" entry is unnecessary, press
4-32
to move the cursor, and press
to select the start point, and press
.
.
.
at the position you wish to
Select "LAT/LON".
Select "OWN SHIP".
Select "CURSOR".
Select "WPT LIST".
Select "EVENT LIST".
Select "PRE WPT"
.
.
.
.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents