Download  Print this page

JRC JLR-7500 Instruction Manual: Setting Route Default Settings

Hide thumbs

Advertisement

4.5.7

Setting Route Default Settings

· The route default value is applied to routes created via GOTO.
· The following is an overview of the route default settings submenu.
(1) WIDTH PORT:
(2) WIDTH STBD:
(3) ARRIVAL RAD:
(4) SPEED:
(5) SAIL GC/RL:
(6) SOG SMOOTHING: Smoothing can be applied to ship speed when calculating expected
Procedure
1.
Press
,
2.
Select the number of the item you wish to set.
3.
Select "SET" with
If you do not wish to set an item, select "OFF" and press
4.
Enter values with the numeric keypad, and press
The port route width can be set.
The starboard route width can be set.
The arrival circle radius can be set.
The planned speed can be set.
GC or RL can be selected as the sail calculation method.
arrival time and expected time required.
Up to 99 seconds of smoothing can be set. When the estimated arrival
time has a large degree of variance, use a large smoothing value.
, and then
to display the route default setting screen.
and press
.
.
.
4-53

Advertisement

   Also See for JRC JLR-7500

   Related Manuals for JRC JLR-7500

This manual also for:

Jlr-7800Nwz-4740

Comments to this Manuals

Symbols: 0
Latest comments: