Startup (Error-1); Startup (Error-2) - JRC JLR-7500 Instruction Manual

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

4.2.1.2

Startup (Error-1)

If any of the self-diagnosis results are "NG", the results are displayed.
The unit does not switch to the standard screen unless the
Attention
If any errors (NG) are detected, please contact JRC or an affiliate.
4.2.1.3

Startup (Error-2)

Messages shown below may be displayed during sensor diagnostics.
The message appears when display unit and sensor configuration settings do not match, such as
when equipment has been replaced.
When this occurs, select one of the items, and press the
[ 1. USE SENSOR CONFIG.]:
[ 2. USE DISPLAY CONFIG.]:
Attention
Consult with JRC or its affiliate if this is displayed frequently.
4-6
Replaces display configuration with the sensor configuration.
Replaces the sensor configuration with the display configuration.
key is pressed.
key to perform it.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents