Download  Print this page

JRC JLR-7500 Instruction Manual: System Settings; Setting The Time Difference; Setting The Date Display

Hide thumbs

Advertisement

4.15 System Settings

· Select "5. SYSTEM" on the main menu to display the system settings screen.
The following is an overview of each submenu.
(1) TIME DIFF: To display the time at the current location, enter the difference between the
(2) DATE DISP: Select " 'YY-MM-DD", "DD MM, 'YY", or "MM DD, 'YY".
(3) TIME DISP: You can select 24 hour or 12 hour display.
(4) DATUM: You can select a geodetic system from the list in "Appendix 1 Geodetic
Systems".
(5) UNIT - DIST/SPEED: You can choose units of "NM, kn", "km, km/h", or "mi, mi/h".
(6) UNIT - HEIGHT/DEPTH: You can select m, ft, or fm.
(7) UNIT - TEMPERATURE: You can select ℃ or ℉ .
(8) MAG CORR: You can select automatic or manual magnetic correction, or turn magnetic
(9) SPEED Meter: You can set the maximum value of the analogue speed meter on the

4.15.1 Setting the Time Difference

· You can set the time difference between your current location and UTC.
An YY denotes a year, an MM denotes a month, and a DD denotes a day.
· For Japan, the time difference is +9 hours, so you would input +09:00.
· When a time difference is set, the local time will be displayed (shown with an "L").
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1.
Press
,
2.
Select + or - with

4.15.2 Setting the Date Display

· You can set the date display format to " 'YY-MM-DD", "DD MM, 'YY", or "MM DD, 'YY".
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
Procedure
1.
Press
,
2.
Select the display format with
local time and UTC.
correction off.
CDI screen.
, and then
, enter the time with the numeric keypad, and press
, and then
to select "TIME DIFF".
to select "DATE DISP".
, and press
.
.
4-85

Advertisement

   Also See for JRC JLR-7500

   Related Manuals for JRC JLR-7500

This manual also for:

Jlr-7800Nwz-4740

Comments to this Manuals

Symbols: 0
Latest comments: