JRC JLR-7500 Instruction Manual page 91

(4) When "FROM TO" is Selected
Multiple route numbers can be copied.
Enter the start point and end point with the numeric keypad, and press
4. The cursor will move to the "COPY DEST", so press
5. Press
The following is an overview of the copy destination submenu.
(1) ROUTE LIST: Select the destination route number to copy to from the route list.
(2) ROUTE NO.: Use the numeric keypad to enter the route number to copy information
When multiple numbers are selected as the copy source, the information will be pasted
sequentially starting from the selected copy destination number.
(1) When "ROUTE LIST" is Selected
The route list, from 1 to 100, will be displayed, so move the cursor and press
Please refer to "4.8.2 Moving the Cursor to an Unregistered Number" for more details.
(2) When "ROUTE No." is Selected
Use the numeric keypad to select the route number to be copied to, and press
6. In the case a temporary route and sharing route are copied, select the copy destination of
waypoint. Please refer to "4.4.5 Copying Waypoint Information" procedure 5 for selection of
copy destination.
7. The cursor will move to the "COPY", so press
If there is insufficient continuous free space at the copy destination location, the following will
be displayed. Press
to select the copy destination, and then press
to.
to select the copy method, and press
.
Copy Origin Start
Copy Origin End
Copy Quantity
.
.
Start of Copy Destination
.
.
.
.
4-47