Changing Line Types; Own Ship Display; Displaying The Distance Circle; Displaying The Own Ship Vector - JRC JLR-7500 Instruction Manual

4.3.10.3 Changing Line Types

The line type can be changed.
Line types can be set for each line, but cannot be changed after the line has been set.
Procedure
1. Press ,
2. Press

4.3.11 Own Ship Display

· The distance circle from own ship, and the ship's vector, are displayed.
· The own ship symbol cannot be changed.

4.3.11.1 Displaying the Distance Circle

A circle, centered on own ship, is displayed by specifying the radius.
Settings can be made between 0.1 and 9.9 NM.
Procedure
1. Press ,
2. Press
3. Use the numeric keypad to enter the distance radius [NM], and press

4.3.11.2 Displaying the Own Ship Vector

Setting the time allows the vector line to the point own ship will arrive at in the set time to be
displayed.
Settings can be made between 0.1 and 9.9 minutes.
Procedure
1. Press ,
2. Press
3. Use the numeric keypad to enter the time [min], and press
, and then , and select "LINE".
to select the line type, and press
Line Type List
, and then
to select "SET", and press
, and then
to select "SET", and press
.
, and select "OWN CIRCLE".
.
, and select "OWN VECTOR".
.
.
.
4-27