JRC JLR-7500 Instruction Manual page 152

Hide thumbs Also See for JLR-7500:
Table of Contents

Advertisement

7.
Press "OUT TYPE", and select the data you wish to output.
Output data types:
· ALL WPT
All waypoint data in the waypoint list is output as WPL sentences.
· ALL ROUTE
All route data in the route list is output as RTE sentences.
· ALL WPT + ROUTE
All waypoint data in the waypoint list, and all route data in the route list, is output as WPL
and RTE sentences.
· ROUTE
The specified route data is output as an RTE sentence.
Route specification can be performed from the "ROUTE LIST", "ROUTE No.", or "FROM
TO".
· ROUTE + WPT
The specified route data and route waypoint data is output as RTE and WPL sentences.
Route specification can be performed from the "ROUTE LIST", "ROUTE No.", or "FROM
TO".
Select "ROUTE" or "ROUTE + WPT" as the output type, and the route selection method
will be displayed. Select one and set the route to be output.
· ROUTE LIST
The route list will be displayed. Select the route you wish to output, and press
Multiple contiguous route numbers can be selected.
Please refer to "4.8.3 Selecting a Range within a List" for details regarding range
selection.
· ROUTE No.
Enter the route number and press
· FROM TO
Multiple contiguous route numbers can be selected. Enter the route numbers you want to
output from the first route to the last, and press
4-108
ROUTE or ROUTE + WPT
.
.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlr-7800Nwz-4740

Table of Contents