Deleting Waypoint Symbols; Route Display - JRC JLR-7500 Instruction Manual

4.3.6.3

Deleting Waypoint Symbols

Waypoints can be deleted.
Deleted waypoints will also be deleted from the waypoint list. However, waypoints on the active
route will be deleted from the route, but will not be deleted from the waypoint list (skip). For
details regarding skipping, refer to "4.3.7.3 Skipping Route Waypoints".
Deletion is also possible from the menu. Please refer to "4.4.6 Deleting Waypoints".
Procedure
1. Press , and display the cursor.
2. Press
waypoint information.
3. Press .
4.3.7

Route Display

· When navigation starts, the active route, arrival circle, and route width are displayed on the plot
screen.
· To hide the arrival circle and route width, set "ARRIVAL CIRCLE" and "XTD" to "OFF" as
directed in "4.3.12 Hiding Plot Screen Symbols".
· To display only the arrival circle and route width for the LEG, set "ARRIVAL CIRCLE" and
"XTD" to "LEG" as described in "4.3.12 Hiding Plot Screen Symbols". If set to "ON", the arrival
circles and route widths for each LEG will be displayed.
· Arrival circles and route widths for routes for which navigation is underway cannot be edited.
· Refer to "4.5.2 Creating Routes" for information regarding how to create routes.
· Refer to "4.6 Performing Navigation" for information regarding how to perform navigation.
to move the cursor to the waypoint symbol and display the
4-15