Download Print this page

JRC JLR-7500 Instruction Manual: Stopping The Alarm Buzzer; Changing The Display; Displaying Alarm Information

Hide thumbs

Advertisement

4.2.5

Stopping the Alarm Buzzer

The buzzer can be stopped by pressing the
The buzzer sounds when one of the following occurs.
· Position measurement is interrupted
· An error occurs
Memo
· Mutual Acknowledgement Function
When positioning is stopped and the buzzer sounds, the mutual acknowledgement
function can be used to stop the buzzer from another unit. To use this function, units
must be connected via contact input / output or ALR, ACK sentences.
4.2.6

Changing the Display

Each time the
Screen")
4.2.7

Displaying Alarm Information

Each time the
When alarm information is updated, the * symbol appears on the status bar.
A: Alarm Occurred
V: Alarm Recovered
ACK: Acknowledgement
Memo
· If no alarm has occurred, "NO ALARMS" is displayed.
key is pressed, the screen display changes. (Refer to "3.1 Display
key is pressed, the screen display changes.
Alarm Contents
Alarm Information Refresh Mark
key.
Alarm Number
Alarm Occurrence
Date/Time
Alarm
Information
Display Area
4-9

Advertisement

   Also See for JRC JLR-7500

   Related Manuals for JRC JLR-7500

   Related Content for JRC JLR-7500

This manual also for:

Jlr-7800, Nwz-4740

Comments to this Manuals

Symbols: 0
Latest comments: