Canceling The Route; Storing The Current Position (Event) - JRC JLR-7700MKII Instruction Manual

JLR-7700 MK 2 GPS Navigator
4.3.1.4

Canceling the Route

Entering "X X X" for a destination can cancel the route plan.
The following operations can cancel a given preset route. Note that they will also cancel the route plan. (See
the item 4.5.3 "Route Plan" for details.) Note that the route plan can also be cancelled by the other methods.
See the item 4.5.3.2 "Canceling the Route Plan" for details.
Press the GOTO and CLR keys, which will highlight the
condition will enter the X X X. Now, the preset route plan is canceled.
Change the input status for the destination as follows.
Press the GOTO key
Press the CLR key
Press the CLR key
4.3.1.5

Storing the Current Position (Event)

Press the EVENT key to store the current position at a waypoint number in the range of #400 to #499. The
current position thus stored is displayed with the
Press the GOTO key to display the stored number on the PLOT screen. The stored number is displayed on
the right hand side of the
46
_ _ _ (This is the status that is waiting for the input.)
X X X (The route will be canceled.)
0 0 2 (The display returns to the original mode before commencing
the cancel operation.)
mark. Press the CLR key if the number does not need to be displayed.
X X X . Then, pressing the ENT key under this
mark on the PLOT screen.