4.3.2
COURSE DEVIATION IND. Screen
The following operations can be made on the COURSE DEVIATION IND. screen besides those under the
items 4.3.1.1 "Setting a Destination" and 4.3.1.5 "Storing the Current Position".
Next Destination number
Bar graph showing the
course deviation
Current position
(Pressing the
or
will change the display
to the loran time difference)
Course over ground
(Magnetic bearing)
Speed over ground
4.3.2.1
Switching the CDI Meter Scale
The CDI meter scale can be switched by pressing the RNG
(Switching from 0.1 NM to 0.3 NM and vise versa.)
4.3.2.2
Switching the Display on the Two Bottom Lines
The contents of the display in the two bottom lines can be switched by pressing the ALT
Switching between "CRS/SPD/TTG/XTE" and "CMG/VAR/VTD". (See the terminology shown below)
Destination to the bearing angle
key
Course deviation and
steering direction
L : Steer to the left
{
R : Steer to the right
JLR-7700 MK 2 GPS Navigator
Local time
Distance to the destination
Switching of the CDI
meter scale
( 0.1nm
Switching the two bottom lines
(CRS/SPD/TTG/XTE)
(CMG/VAR/VTD)
Time to go to the destination
key.
0.3 nm)
key.
47