Table 3-5 Function Key Codes By Number - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
Use this key...
Code: 01 + dest.
ext. or outside tel # +
Hold
Operation: Press
key
Code: 02
Operation: Set up
call + Press key
Code: 03
Operation: Press
key
Code: 04
Operation: Press
key
Code: 05
Operation: Press
key
Code: 06
Operation:
Establish call + Hold
+ Ext + Press key
Code: 07
Operation: Set up
call + Press key +
set up call to add +
Press key twice
Code: 08
Operation: Press
key
Code: 09 + mode
(1~4 or 1~8)
Operation: Press
key
Code: 10
Operation: Press
key + Dest. Ext.
Features and Specifications Manual

Table 3-5 Function Key Codes by Number

press the key and enter the code (e.g., 48 for Voice Over).
For this feature...
Direct Station
Selection,
Hotline, One-Touch
Calling
Microphone Cutoff
Do Not Disturb
Background Music
Headset Operation
Transfer
Conference
Incoming Caller ID List
Night Service
Call Forwarding,
Immediate
When you ...
Call an extension or
outside number using a
DSS key.
Use Microphone Cutoff.
Activate DND.
Turn BGM on or off.
Enable or disable
Headset Operation.
Transfer a call.
Set up a conference or a
Meet Me Conference.
List incoming caller ID to
extension.
Activate the Day/Night
Mode.
Call Forward to extension
or Voice Mail.
Issue 11.0
Also see
Key Lamp Status
Srvc Code
Off = extension
idle
On = extension
busy
Flashing = DND
On red when
activated
On red when
activated
On red when
activated
On red when
activated
None
On red during
setup
Flashing when
new log created
On in call log
On red when 718 + mode
activated (1~4 or
Slowly flashes red
747
-
-
725
734
-
#1
-
1~8)
741
3 - 35