2.4.3 Doorphone and Door Opener
Connection
The maximum cable length
Installing the Doorphone
screw
Connect the wires
to the pins (no.25 and 50) of
the extension connector.
(See the "Pin Number Chart"
on page 2-14.)
One doorphone (KX-T30865) and one door opener (user-supplied)
can be installed.
The maximum length of the doorphone and door opener line cord
which connects to the system is as follows:
Doorphone
Door Opener
1. Loosen the screw to separate the
doorphone into two halves.
2. Install the base cover to the wall with two screws.
Note
Two kinds of screws are included.
Please choose the appropriate one
depending on your wall type:
3. Connect the wires to the screws located in the front cover.
4. Secure both halves together and re-install the screw.
Diameter of the line
22AWG
24AWG
26AWG
22AWG
Type 1: When the doorphone plate has been
fixed to the wall.
Type 2: When you wish to install the
doorphone directly to the wall.
Installation
Max. length
180m (590 feet)
113m (370 feet)
70m (230 feet)
180m (590 feet)
2-29