Outside Line Programming
l
Description
Selection
Default
Programming
Conditions
Feature References
Reverse Circuit Assignment
Enables or disables to detect Reverse Circuit.
Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l
Regular (no detection) / Reverse (detection)
l
Regular
1.
Enter 416.
Display: 416 REV. CURRENT
2.
Press NEXT.
Display: CO Line NO?+
Enter an outside line number.
3.
To enter outside line number 1, you can also press
Display example: COl:Regular
Keep pressing SELECT until the desired selection is
4.
displayed.
Press STORE.
5.
6.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7.
Repeat steps 4 through 6.
Press END.
8.
To &sign all outside lines to one selection, press the * key in step 3.
l
In this case, the display shows the contents progmmed for outside line
1.
Section 3, Features
Reverse Circuit
4 1 6
NEXT.
System Programming