2.3 Timer Programming
[210] Automatic Redial Interval Time
Description
Sets the interval time between Automatic Redial attempts.
Selection
Time (seconds): 3 through 120 ( 10 is the actual time)
Default
60 s
Programming
1.
Enter 210.
Display: Interval Time
2.
Press NEXT.
Display example: Time: 60 sec
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.
Press STORE.
5.
Press END.
Conditions
• You enter a number from 3 through 120. The actual time is 10 times your input.
• Programme [209] Automatic Redial Repeat Times is used to set the number of times
Automatic Redial is tried.
• You cannot leave the entry empty.
Features Guide References
Redial
106
General Programming