Timer Programming
[210] Automatic Redial Interval Time
Description
Sets the interval time between Automatic Redial attempts.
Selection
Time (seconds): 30 through 1200
Default
60 sec
Programming
1.
Enter 210.
Display: Interval Time
2.
Press NEXT.
Display example: Time: 60 sec
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
Conditions
• Programme [209] Automatic Redial Repeat Times is used to set the number of times
Automatic Redial is tried.
• You cannot leave the entry empty.
Features Guide References
Redial, Automatic
122
Programming Guide