Charge Verification Assignment - Panasonic KX-TD1232JT Programming Manual

[122] Charge Verification Assignment

Description
Assigns the extension which is allowed to refer or clear for the call information on the
extension, outside line, account code, and the total.
Selection
• Jack number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks)
• Enable / Disable
Default
All jacks – Enable
Programming
1.
Enter 122.
Display: Charge Refer Ext
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Press END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the slave, if available.
• To assign all jack numbers to one selection, press the
In this case, the display shows the contents programmed for Jack 01.
Features Guide References
Charge Fee Reference
General Programming
2.2 System Programming
key in step 3.
85