Manager Programming
[016] Charge Rate Assignment
Description
Assigns the rate to each CO port. This rate is multiplied with the meter charge to generate a
charge in currency.
Selection
• CO port number: 1 through 3
• Charge rate: 10 digits max. (including the decimal point)
Default
G: 0.12
SL: 0.10
SW,FL,NW,PR,DM,BL,JT: 0.01
Programming
1.
Enter 016.
Display: Charge Rate Asn
2.
Press NEXT.
Display: Port NO?
3.
Enter a CO port number.
To enter CO port number 1, you can also press NEXT.
Display example: #1 :
4.
Enter a charge rate (to the left of the decimal point).
To delete the current entry, press CLEAR.
5.
Press
6.
Enter a charge rate (to the right of the decimal point).
To delete the current entry, press CLEAR.
7.
Press STORE.
8.
To program another CO port, press NEXT or PREV, or SELECT and the desired CO port
number.
9.
Repeat steps 4 through 7.
10.
Press END.
Conditions
• A maximum of 10 digits, consisting of 0 through 9, can be assigned as the rate. The number
of decimal places depends on the assignment in programme [015] Charge Rate Fractional
Point Assignment.
54
.
0.12
Programming Guide