Acopia Adaptive Resource Switch Cli Maintenance Manual page 78

Upgrading Software
Upgrading a Redundant Pair
WARNING: Arming this release will cause your configuration to be reset to factory
default because it is a lower version than the running release.
Proceed? [yes/no] yes
% INFO: The boot system command may take up to 5 minutes to complete.
prtlndA1kB# reload
Reload the entire chassis? [yes/no] yes
Broadcast message (Fri Jun 3 13:31:35 2006):
The system is going down for reboot NOW!
...
...
User Access Authentication
Username: admin
Password: password
************************ NOTICE *********************
The system detected an incompatible future version
of its configuration-database file(s).
The following file(s) have been automatically backed up.
complete database:
The current running-config has been reset to factory
defaults, plus the minimal configuration obtained during
4-16
The peer switch takes full control of services when the downgraded switch reboots.
Recall that the peer switch is still running the old software.
When the downgraded switch returns from its reboot and you log back in, a notice
informs you that the running-config has been reset to factory defaults. For example:
omDb.complete.copy.Dec03_1534
CLI Maintenance Guide