Showing Tasks From One Processor - Acopia Adaptive Resource Switch Cli Maintenance Manual

Troubleshooting Tools
Listing Current System Tasks

Showing Tasks from One Processor

bstnA6k> show processors
Proc Module State
---- ------ ----------
1.1 SCM Up
3.1 ASM Up
3.2 ASM Up
5.1* NSM Up
5.2 NSM Up
5.3* NSM Up
5.4 NSM Up
5.5 NSM Up
5.6 NSM Up
* Dedicated ASM Gateway
bstnA6k> show system tasks from 1.1
Proc Subsystem
---- ------------------
1.1 afnFfpMgrd
1.1 afnipceventmgrd
1.1 afnloggermgrd
6-36
You can show the tasks running on a single processor by adding the
show system tasks from slot.processor
where
slot (1-6 on an ARX®6000) is the slot number of the desired module, and
processor (1-6) is the processor number. Use
list of processors (and their modules and slots) on the ARX.
For example, the following command sequence shows all processors on an
ARX®6000 and then lists the tasks running on processor 1.1:
Up Time
------------------
0 days, 00:41:50
0 days, 00:38:01
0 days, 00:38:01
0 days, 00:43:21
0 days, 00:43:21
0 days, 00:43:22
0 days, 00:43:22
0 days, 00:43:23
0 days, 00:43:23
Instance
--------
1
1
1
Total Kb
--------
4138060
4138060
4138060
1017576
1017576
1017576
1017576
1017576
1017576
Memory (Kb) CPU%
------------ ----
10364 0
9548 0
11840 0
clause:
from
for a complete
show processor
Free Kb CPU1M
------- ------
3447132 7
3795956 0
3758664 0
613570 0
613570 0
602370 0
602370 0
588994 0
588994 0
CLI Maintenance Guide
CPU5M
-----
10
0
0
0
0
0
0
0
0