Upgrading A Redundant Pair; Verifying The Active Switch's Ability To Take Control - Acopia Adaptive Resource Switch Cli Maintenance Manual

Upgrading Software

Upgrading a Redundant Pair

Slot Admin
---- -------
1 Enabled
2 Enabled
3 Enabled
4 Enabled
5 Enabled
6 Enabled
Resource
--------
Switch
bstnA6k> ...
Upgrading a Redundant Pair

Verifying the Active Switch's Ability to Take Control

4-10
ModuleType ModuleState
------------ ----------------
SCM Online
--- Empty
NSM Online
--- Empty
ASM Online
--- Empty
State
-------------------------------
Up
Redundancy offers an opportunity to test the new software before putting it into
service. You can coordinate the software upgrades by upgrading the backup switch
first, testing it there, then deciding whether or not to upgrade its peer.
Before you upgrade one of the switches, confirm that the chosen Active switch (the
switch that you will not upgrade first) is connected to the quorum disk. The Active
switch must be connected to the quorum disk when you upgrade its peer, or both
switches reboot simultaneously. Use the s
FW Upgrade
----------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Forwarding
----------
Disabled
how redundancy quorum-disk
CLI Maintenance Guide
command to