Acopia Adaptive Resource Switch Cli Maintenance Manual page 240

Troubleshooting Managed Volumes
Correcting Share-Import Errors
Table 8-1. Share Status Conditions (Continued)
Status Condition
Error: Failed to rename a file/directory
on filer.
Error: Failed to resolve IP address for
filer.
Error: Failed to retrieve Kerberos
information.
Error: Failed to unmount filer during
import scan.
Error: File collision detected during
import.
8-34
Description/Action
The ARX may not have adequate permissions for renaming
files. (The volume is permitted to rename files by the
command.) Use the
show exports
permission settings at the filer.
For NFS exports, the back-end share should allow root access to
all of the ARX's proxy IP addresses. Use the
command to list all configured proxy IP
proxy-addresses
addresses.
For CIFS shares, the switch uses the namespace's proxy user as
its identity. The proxy user, created by the
must belong to the Backup Operator's group at this filer; each
filer has a unique Backup Operator's group. The
command sets the proxy user for a namespace.
(gbl-ns)
he back-end device could not be located with the filer name or
T
IP address configured for the filer. From gbl-ext-filer mode, use
the command to reset the filer's address.
ip address
Use the command and/or
show exports
connection to the filer.
(CIFS) The namespace supports Kerberos authentication (see
), but the namespace software is unable to confirm
kerberos-auth
that the share is configured to support Kerberos, too.
Check the connection to the back-end filer with
and/or . Restart the import after you correct the problem.
ping
(NFS) Persistent errors from a back-end share caused the mount
to fail. Check the NFS service at the back-end filer.
A file on this share has the same name and path as a file on an
already-imported share. To fix this, you can manually go to the
filer and rename the file, or you can set the
volume. By setting the
rename the file on import. Then retry the import.
command examine all
show ip
proxy-user
to check the
ping
modify
flag, you allow the volume to
modify
CLI Maintenance Guide
modify
command,
proxy-user
show exports
flag on this