Focusing On Named Configurations - Acopia Adaptive Resource Switch Cli Maintenance Manual

Backing Up the Running Configuration
Saving the Global Config
bstnA6k> show global-config namespace medarcv
;=============================== namespace ===============================
namespace medarcv
kerberos-auth
ntlm-auth-server dc1
ntlm-auth-server dc1-oldStyle
protocol cifs
proxy-user acoProxy2
windows-mgmt-auth readOnly
windows-mgmt-auth fullAccess
sam-reference fs2
volume /lab_equipment
cifs notify-change-mode ignore-subtree-flag
import multi-scan
modify
reimport-modify
auto sync files
hosted-by bstnA6k
metadata share nas1 nfs3 /vol/vol1/meta6
3-14

Focusing On Named Configurations

You can show an individual namespace, volume, or front-end service by specifying
the name at the end of the command:
show global-config namespace name [volume]
where
name (1-30 characters) identifies the namespace,
or
show global-config {nfs | cifs} name
where name (1-255 characters) is the fully-qualified domain name (FQDN) for
the front-end service.
For example, the following command shows the configuration for the "medarcv~"
namespace:
CLI Maintenance Guide