Showing The Local Config - Acopia Adaptive Resource Switch Cli Maintenance Manual

bstnA6k(cfg)# smtp
bstnA6k(cfg-smtp)# mail-server email1.wwmed.com
bstnA6k(cfg-smtp)# from admin@acopia.wwmed.com
bstnA6k(cfg-smtp)# exit
bstnA6k(cfg)# exit
bstnA6k# copy running-config smtp://juser@wwmed.com/oct24running
bstnA6k# ...

Showing the Local Config

bstnA6k> show running-config
; ARX-6000
; Version 2.05.000.09939 (Feb
; Database version: 205000.33
; Generated running-config Thu Feb
; System UUID 501f705c-8735-11d8-8936-a58a9e4556df
; ip private vlan internal 1008 metalog 1009 subnet 169.254.20.0 255.255.255.0
CLI Maintenance Guide
Use the following syntax to send the running-config file in an E-mail message:
copy running-config smtp://[e-mail-address/]file
where
e-mail-address (optional) identifies the recipient of the E-mail message (for
example, "myCoWorker@myco.com"). If you omit this, it defaults to the
E-mail recipient set with the cfg-smtp
separate this from the file name.
file is the chosen file name.
For example, the following command sequence sets up SMTP, exits from cfg mode to
priv-exec mode, then mails the running-config file to "juser@wwmed.com:"
You can send the current local config to the screen without saving it to a file. Use the
command to view all the CLI commands required to re-create the
show running-config
local running-config.
show running-config
For example:
7 2007 17:40:32) [nbuilds]
Backing Up the Running Configuration
to
8 03:42:39 2007
Saving the Local Running Config
command. Use a slash (/) to
3-5