Showing Policy History For A Volume - Acopia Adaptive Resource Switch Cli Maintenance Manual

0x000040006e00000001000000000001000000000000000000--------00000000
Physical File Handle (20 bytes):
0x0100000100030002020000000f831b00c862ec6d
bstnA6k(gbl)# ...

Showing Policy History for a Volume

bstnA6k(gbl)# show policy history wwmed /acct
Namespace: wwmed
Volume: /acct
Rule
----------------------------------------
/acct
Time
--------------------
2008-01-29T05:54:12
2008-01-29T05:54:47
2008-01-29T05:54:47
2008-01-29T05:54:47
2008-01-29T05:54:47
rule.
2008-01-29T05:54:48
scheduled update.
2008-01-29T05:54:48
rule.
CLI Maintenance Guide
From any mode, you can use the
policy transactions for a given managed volume:
show policy history namespace vol-path
where
namespace (1-30 characters) is the namespace, and
vol-path (1-1024 characters) identifies the volume to examine.
The output lists all policy-related events that occurred in the volume, in chronological
order. For example, the following command sequence shows the policy history for the
"wwmed~/acct" volume:
Message
------------------------------------------------------------
Rule [wwmed:/acct:wwmed:/acct:fm1]: Created.
Rule [wwmed:/acct:wwmed:/acct:docs2das8]: Created.
Rule [wwmed:/acct:fm1]: Enabled.
Rule [wwmed:/acct:docs2das8]: Enabled.
Rule [wwmed:/acct:fm1]: The initial scan has been disabled for this
Rule [wwmed:/acct:docs2das8]: Scan interrupted by a configuration or
Rule [wwmed:/acct:fm1]: The initial scan has been disabled for this
Troubleshooting Managed Volumes
Showing Policy History for a Volume
command to show all of the
show policy history
8-77