Acopia Adaptive Resource Switch Cli Maintenance Manual page 246

Troubleshooting Managed Volumes
Correcting Share-Import Errors
Table 8-1. Share Status Conditions (Continued)
Status Condition
Error: Multi-protocol share is split.
Error: Multi-protocol user mapping
error. (nfs read failure)
Error: Multi-protocol user mapping
error. (nfs remove failure)
Error: Multi-protocol user mapping
error. (nfs write failure)
Error: NFS connect failed.
Error: NFS error during import scan.
Error: NFS error occurred during
import scan.
Error: NFS Error while scanning
storage
Error: NFS Version Mismatch
8-40
Description/Action
(multi-protocol) The
filer
a CIFS share over two different directory trees. This is
unsupported. Retry the command with the correct share and
export names, then retry the import.
(multi-protocol) During import, the volume creates a test file
through CIFS and then attempts to read it through NFS. The
volume was unable to read the file as root. Check the NFS
configuration at the back-end share, correct the problem, and
retry the import.
(multi-protocol) During import, the volume creates a test file
through CIFS and then attempts to delete it through NFS. The
volume could read and write the file (as root), but was unable to
remove it. This may indicate a permissions problem in the
top-level directory for the share. Check the NFS configuration at
the back-end share, correct the problem, and retry the import.
(multi-protocol) During import, the volume creates a test file
through CIFS and then attempts to write to it through NFS. The
volume could read the file, but was unable to write to it (as root).
Check the NFS configuration at the back-end share, correct the
problem, and retry the import.
(NFS) Persistent NFS errors from a back-end share caused the
import to fail. Check the NFS service at the back-end filer.
(NFS) The back-end share does not support the NFS version(s)
configured for the external filer. Use the
to check the protocols supported by the filer. Use the
command to change the configured NFS version(s) for the
share/export.
command specified an NFS export and
show exports
CLI Maintenance Guide
command
filer